DRAKE 4000 series II Guide de l'utilisateur télécharger pdf (Page 133)

4000 Digital Series II Issue 1.4 Panel User Guide

STA0380 Page 103

The Direct Access Keys can be programmed with a range of attributes as set in the Configuration and

Master Assignment Programming System (CMAPSi) workstation software. The pushbutton attributes

are:

NOTE: For the above functions, the destination can be a single or group of panels, or a single or group

of external sources.

4.9.12.1 Key Layout and Cross-point Level Indicator

The LCD key display of a configured DAK has 3 sections:

i) Scaleable cross-point level indicator,

ii) First 5 characters of the key assignment's directory entry description field,

iii) Second 5 characters of the key assignment's directory entry description field.

Table 36: PD4222R Pushbutton Attributes

Talk Only A single DAK press causes an audio route to be made

from the source panel to the desired destinations. Nor-

mally used for communication from one panel to another.

Listen Only A single DAK press causes an audio route to be made

from the destination. Used when listening to an external

audio signal (not originating from a Control Panel) is

required.

Talk and Listen A single DAK press causes a bi-directional audio route to

be made between the source panel and the destinations.

Used between panels and also with certain external audio

signals.

Talk & Forced

Listen

This is similar to Talk and Listen except that the Listen

route is permanently made. The operator need only press

the DAK to talk.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 235 236

Pas de commentaire

DRAKE 4000 series II Guide de l'utilisateur Page 133